Easy Lithium Battery Reconditioning Right At Home

A lithium battery is one of the most energetic rechargeable battery there is which contains lithium ions. Upon charging, these ions travel from a positive electrode to the negative side and vice versa upon discharge. This is commonly used to power electronic devices such as music players (e.g. mp3s), laptops, camcorders, cellular phones, telephones, cameras and even electric shavers.

Reconditioned Tool

Lithium Battery Reconditioning

Reconditioned Tool

Like any other reconditioning process, lithium battery reconditioning restores it to its full capacity. In contrast to a nickel-cadmium battery reconditioning which requires a step to fully discharge it, lithium battery reconditioning does not have any memory effect, meaning completely discharging a battery before recharging it is not necessary in a lithium-ion battery.

The primary cause why a battery dies out even before it is supposed to is sulfation. It is an instance when sulfur crystals build up in the lead plates of the battery causing it to be resistant of any charge. This blockage is usually contributed by two factors:

1. When a battery remains idle for quite some time; and
2. When it is too strained due to constant recharging and discharging.

To avoid throwing away your used battery every time it dies out unexpectedly, you can opt to do a lithium battery reconditioning.

How does it work?

A lithium-ion battery is reconditioned by:

1. First, determine the current charge of the battery. This step will help you decide on how exactly you will recondition your battery.
2. After, you can either then apply any of the following to remedies on your Li-ion battery:

o Charge slowly your battery when it has only a charge of 1.5 volts to fully restore its full capacity.
o Use a desulfator to send high-pulse charges to shatter formations of crystals.
o Sometimes, one cell in it is unequally discharged, usually below 2.5 volts. At this point, the battery dies. To reactivate the safety circuit in your battery, boost charge it using a special or programmable charger.
o To do away with the memory effects, slowly discharge your battery.

Why bother recondition?

Lithium battery reconditioning at your own homes is easy to do. All you need is a detailed guide to direct you on how to carefully execute each step, and the right tools. The process is simple that you yourself can do the reconditioning! Apart from this, you are doing yourself a favor by saving and prolonging the life of your battery. You do not have to buy a battery for your cellular phone every time it malfunctions because you yourself know how to revive it right at home. Now, how convenient is that?

Most of your gadgets nowadays are powered by lithium-ion battery. To avoid the expense of having to replace it every now and then, why not try reconditioning it yourself at the comfort of your own homes?

Easy Lithium Battery Reconditioning Right At Home
Reconditioned Tool

Special Price!!! Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

Oct 31, 2011 04:51:04

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)
Click for larger image and other views

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

>> Click here to update Cheapest prices for Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) <<

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Feature

  • Tool body compatible with all Hitachi Lithium Ion, NiCd and NiMH 18V batteries
  • Constructed with triple seal design to protect from dust an debris generated during use- also protects from water waste when cutting into pipes
  • Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time
  • Tool-less blade changing system for quick replacements and reduced downtime
  • Foot adjustment for depth-of-cut control and extended blade life


Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Overview

Tool body compatible with all Hitachi Lithium Ion, NiCd and NiMH 18V post-style batteries Constructed with triple seal design to protect from dust an debris generated during use- also protects from water waste when cutting into pipes Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time Fan cooled motor for optimum speed and added durability Replaceable carbon brushes for longer tool life Tool-less blade changing system for quick replacements and reduced downtime Foot adjustment for depth-of-cut control and extended blade life Reversible blade setting for reverse cutting



SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery)

Limited Offer Today!! Bare-Tool Hitachi CR18DLP4 18-Volt Lithium-Ion Reciprocating Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Ipod Home Theater System Mini Microwave Makita Tool

Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver

Special Price!!! Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver

Oct 29, 2011 06:22:36

Factory-Reconditioned Milwaukee 2401-82 12-Volt  Lithium Ion Sub-Compact Driver
Click for larger image and other views

Factory-Reconditioned Milwaukee 2401-82 12-Volt  Lithium Ion Sub-Compact Driver

>> Click here to update Cheapest prices for Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver <<

Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver Feature

  • 30 Percent more run-time than the competition with the ability to drive up to 130 3-Inch screws
  • Metal gear housing ensures a greater durability and a longer tool life
  • 30-minute charger keeps you working with little to no downtime
  • Small compact size gives you the freedom to use a power tool where not normally accessible with other driver/drills
  • This factory-reconditioned model is the same as the new model 2401-22


Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 12V Cordless Lithium-Ion Sub-Compact Screwdriver - 2401-82, (2) 12V Lithium-Ion Batteries - 48-11-2401, 30-Minute Charger - 48-59-2401, Soft Case - 48-55-2401



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Milwaukee 2401-82 12-Volt  Lithium Ion Sub-Compact Driver

Limited Offer Today!! Factory-Reconditioned Milwaukee 2401-82 12-Volt Lithium Ion Sub-Compact Driver Black Friday and Cyber Monday Deals

Stroller For Newborn Random Orbit Sander

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

Special Price!!! Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

Oct 27, 2011 16:58:09

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)
Click for larger image and other views

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

>> Click here to update Cheapest prices for Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) <<

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Feature

  • Reconditioned Milwaukee Products have a One-year warranty through the Milwaukee factory or an authorized service center
  • The patented gear-protecting clutch helps extend the life of the tool by reducing wear to the vital areas of the saw
  • Uses the New M18 18V XC High Capacity LITHIUM-ION battery system that delivers a longer tool life and extended run-times
  • The lever action QUIK-LOK blade clamp allows you to easily remove and replace blades without the use of a tool
  • The on-board battery fuel gauge displays the remaining battery run-time so you know when to change batteries or recharge


Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless M18 Sawzall Reciprocating Saw (Tool Only) - 2620-20



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

Limited Offer Today!! Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Multi Power Tool

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.

Special Price!!! Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.

Oct 26, 2011 04:39:34

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.
Click for larger image and other views

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.

>> Click here to update Cheapest prices for Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. <<

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. Feature

  • Compatible with Fein, Bosch, CRAFTSMAN and more, see description for full tool compatibility list.
  • Thick gauge metals and high quality manufacturing techniques insure superior wear tolerance and life
  • Universal arbor allows multiple position settings for slip free operation at varying blade angles
  • Contractors pack, profession selection of top blades used in job site construction duties
  • Pack of 15 accessories, stock your toolbox and get the best per blade price


Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. Overview

MB3A3B3C3D1H1I1J Blade kit includes 15 pieces of 7 blade types. 3 Pack Versa-Tool 2-1/2-inch wood cutting saw blades ideal for flush cuts and cut-outs in hard, non metallic materials such as hardwoods, plywood and particle board this wood blade can also tackle materials such as plastics, fiberglass and Plexiglas. 3 Pack Versa-Tool 1-3/8-Inch precision Japan saw blades ideal for flush cuts and cut-outs for switches, outlets, hardwood floors, base boards, trim and molding. 3 pack Versa-Tool 1-3/8-inch Bi-Metal saw blades ideal for demolition, plumbing, remodeling and general wood and metal cutting. The Versa-Tool Bi-Metal oscillating saw blade cuts nail embedded wood, fiberglass, tubing, PVC, copper Pipe, metal mesh and sheet metal. 3 Pack Versa-Tool 1-3/8-Inch wood cutting saw blades ideal for flush cuts and cut-outs in hard, non metallic materials such as hardwoods, plywood and particle board this wood blade can also tackle materials such as plastics, fiberglass and Plexiglas. 3 Inch saw blade assortment, 3 types. Type 1: Full 3 Inch design -The circular design allows greater control and stability while ripping and cutting materials. Type 2: Semi-circular design - Allows the blade to cut into corners and 90 degree angles without making unsightly over cuts. Type 3: depressed flush cut arbor - Sits flat and allows precise cuts in difficult cutting situations. The Versa-Tool universal arbor system is compatible with the following brands. Fein Multimaster (All models including FMM250Q, 250, MSx 315 and all models featuring 3/8 inch round arbors), Bosch corded and cordless multi - x, CRAFTSMAN, Chicago Electric, Tool Mate, Power Craft, SECCO, HTC-87, EINHELL, Top Craft, Artwork, MEEC Tools, Man Power, Millarco prof, Westfalia, Falke, Ferm Zwolle Holland, Cougar, Rock Worth, B&Q, Counstructor, Duro, Work Best, Matrix, Pro-Line, Ideenshop, Driving Force, LongActive, VOSS. The Versa-Tool universal arbor system is not compatible with the Fein Supercut, DREMEL or Sonicrafter



SAVE NOW on the special offers below!

Available In Stock.

This Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.

Limited Offer Today!! Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. Black Friday and Cyber Monday Deals

Herb Supplements 46 1080P Lcd Hdtv

Battery Reconditioning For Lead Acid Batteries

Battery reconditioning is most popular on lead acid batteries. A good deep cycle lead acid battery can cost upwards of 0 and the parts to recondition it can be had for less than . Quite simply that means that by reconditioning one lead acid battery you'll be saving money. Some savvy people have turned it into a side business and earn money by battery reconditioning.

Reconditioned Tool

In order to understand why lead acids need to be reconditioned we need to take a look at what happens during a charge/discharge cycle. As the battery is charged and discharged little sulfate crystals build up on the lead plates.

Reconditioned Tool

Over time these little crystals build up and start interfering with how much power the battery can hold. Over time the charge level will go down and the battery will appear 'dead'. It's not really dead though it's just got a buildup of these sulfate crystals.

Battery reconditioners for lead acids are called desulfators or nanopulsers. Basically what they do is send little pulses into your battery which eventually break up all those little crystals and make your battery work again.

Reconditioning a lead acid battery is a little time consuming as it can take up to 2 weeks to fully desulfate it, but since it only costs (and only in power for each one after) it's well worth the cost.

There are several places online where you can learn how to recondition batteries. A quick internet search will turn up several guides. I highly recommend you use a guide because there are some tricky parts that you need to follow exactly or the process may not work.

I highly recommend reconditioning your batteries. It just doesn't make sense not to. Not only are you saving money, but you're also helping the environment by keep that battery from a landfill a little bit longer.

Battery Reconditioning For Lead Acid Batteries
Reconditioned Tool

Led Lcd 1080P Hdtv

DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw

Special Price!!! DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw

Oct 23, 2011 14:14:18

DEWALT Bare-Tool DC385B  18-Volt Cordless Reciprocating Saw
Click for larger image and other views

DEWALT Bare-Tool DC385B  18-Volt Cordless Reciprocating Saw

>> Click here to update Cheapest prices for DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw <<

DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw Feature

  • 1-1/8-inch stroke length and 0-3,000 rpm for faster cutting speed
  • 4-position blade clamp allows for flush cutting and increased versatility
  • Lever-action keyless blade clamp for quick and easy blade changes
  • Anti-slip comfort grip provides increased comfort and control; pivoting adjustable shoe with open top for maximum visibility
  • Tool only (battery not included)


DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw Overview

The DeWalt DC385 is a 18V heavy-duty cordless reciprocating saw. The 18v cordless reciprocating saw provides 1 stroke length and 2900 SPM for fast cutting. Its keyless blade clamp allows for changing the blade quickly. The electric brake prevents blades from breaking. It is a compact and lightweight tool. The cordless saw has an anti-slip comfort grip, which provides increased comfort and control while operating.



SAVE NOW on the special offers below!

Available In Stock.

This DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

DEWALT Bare-Tool DC385B  18-Volt Cordless Reciprocating Saw

Limited Offer Today!! DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw Black Friday and Cyber Monday Deals

Chantal Cookware Neuton Mower

Reviewing Porter Power Tools

You've got to have the right tool for the job. Today, we look the very nice Porter Cable three nailer and compressor combo kit. This kit is a favorite of mine.

Reconditioned Tool

While some kits might be lacking in components, the Porter Cable three nailer and compressor combo kit has a finish nailer, brad nailer, stapler, narrow crown stapler, air house, fasteners, nailer oil, manuals and more.

Reconditioned Tool

With tools, as you probably know, you really get what you pay for. While the Porter Cable kit normally runs 0, it can be had for 1/3rd of that. Talk about getting bang for your air power tool buck.

The Porter Cable three nailer and compressor combo kit has a 120-volt, 10 amp pump. This baby provides some serious air. The portable 6-gallon air tank can also supply up to 150 psi for all those other air power tools you have. And if you don't have any other air power tools, this is a great reason to go out and get some.

The 16-gauge finish nail gun, with -inch nails, is perfect for casings and moldings. It's versatile. You can switch to 2-1/2-inch nails and secure some baseboard or moldings. It's also good for door frames and jambs. And it's just one feature of this Porter Cable combo kit. It's very nice.

Whether you're working on casings or upholstery or low voltage wiring, the Porter Cable three nailer and compressor combo kit is a must have air power tool as far as I'm concerned. Just make sure you don't pay 0 for it. It can be had for about 0-0 at the right place.

One thing is for sure, once your buy the Porter Cable three nailer and compressor combo kit, you'll wish you'd done it sooner. One construction company owner, purchased a couple of them and he says they are a great investment. As C. Dwight Barnett said, "All you need is an outlet and an idea."

Reviewing Porter Power Tools
Reconditioned Tool

Special Price!!! Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

Oct 22, 2011 11:43:20

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)
Click for larger image and other views

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

>> Click here to update Cheapest prices for Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) <<

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Feature

  • Reconditioned Milwaukee Products have a One-year warranty through the Milwaukee factory or an authorized service center
  • The patented gear-protecting clutch helps extend the life of the tool by reducing wear to the vital areas of the saw
  • Uses the New M18 18V XC High Capacity LITHIUM-ION battery system that delivers a longer tool life and extended run-times
  • The lever action QUIK-LOK blade clamp allows you to easily remove and replace blades without the use of a tool
  • The on-board battery fuel gauge displays the remaining battery run-time so you know when to change batteries or recharge


Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless M18 Sawzall Reciprocating Saw (Tool Only) - 2620-20



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery)

Limited Offer Today!! Factory-Reconditioned Bare-Tool Milwaukee 2620-80 18-Volt Cordless M18 Sawzall Reciprocating Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Benq Video Projector Batman Cookie Cutter Rear Projectors

Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned)

Special Price!!! Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned)

Oct 21, 2011 07:43:24

Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned)
Click for larger image and other views

Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned)

>> Click here to update Cheapest prices for Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned) <<

Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned) Feature

  • 18V Cordless 3/8-in 2-Speed Drill/Driver - 2887-RT
  • Site-Lite built-in worklight
  • Forward/reverse indicator to know what you are drilling
  • Speed selector - high speed for drilling with smaller bits, and high torque for screwdriving and larger holes
  • Keyless chuck for easy bit changes


Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned) Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless 3/8-in 2-Speed Drill/Driver - 2887-RT, 18V Cordless Orbital Jigsaw - 4570-RT, 18V Octo Finishing Sander - 7305-RT, 18V Flashlight - 2897-RT, Charger - SC118, Battery - SB18A



SAVE NOW on the special offers below!

Available In Stock.

This Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned)

Limited Offer Today!! Skil 2887-23-RT 18V Cordless 4-Tool Combo Kit (Factory Reconditioned) Black Friday and Cyber Monday Deals

60 Watt Soldering Iron Tablets Android

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)

Special Price!!! Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)

Oct 20, 2011 03:11:07

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)
Click for larger image and other views

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)

>> Click here to update Cheapest prices for Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery) <<

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery) Feature

  • Reconditioned Milwaukee Products have a One-year warranty through the Milwaukee factory or an authorized service center
  • 1/2-Inch ratcheting chuck with plastic sleeve
  • Heavy-duty 2-speed metal gear box provides 0 to 350 and 0 to 1,400 RPM
  • Compact length of 7-3/4-inches fits in tight areas
  • Built-in LED light illuminates work surfaces


Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery) Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless M18 Lithium-Ion 1/2-in Driver/Drill (Tool Only) - 2601-80



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery)

Limited Offer Today!! Factory-Reconditioned Bare-Tool Milwaukee 2601-80 18-Volt Cordless M18 Lithium-Ion 1/2-Inch Driver/Drill (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Sunbeam Mixer

Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit

Special Price!!! Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit

Oct 19, 2011 02:24:58

Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit
Click for larger image and other views

Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit

>> Click here to update Cheapest prices for Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit <<

Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit Feature

  • 1/2-in Compact Driver-Drill - BDF452HW-R
  • Makita built, 4-pole maximum torque motor delivers 450-in-lbs of efficient torque in a compact size
  • More compact design at only 8-3/4-in. long and weighs only 3.6 lbs. for reduced operator fatigue
  • Trigger-forward built-in L.E.D. light illuminates the work area
  • Ergonomic shape fits like a glove with even pressure and easy control grip


Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless Compact Lithium-Ion 1/2-in Driver-Drill - BDF452HW-R, 18V Cordless Compact Lithium-Ion 1/4-in Impact Driver - BTD142HW-R, (2) 18V Compact Lithium-Ion Batteries - BL1815, 15-Minute Rapid Optimum Charger - DC18RA, Contractor Bag, Operating Manual



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit

Limited Offer Today!! Factory-Reconditioned Makita LCT200W-R 18V Cordless Lithium-Ion Compact 2-Piece Combo Kit Black Friday and Cyber Monday Deals

Biggest Lava Lamp

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

Special Price!!! Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

Oct 18, 2011 01:14:52

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler
Click for larger image and other views

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

>> Click here to update Cheapest prices for Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler <<

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Feature

  • Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
  • Selectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spaces
  • Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
  • Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durability
  • Reversible belt hook: with integrated pencil sharpener for ultimate convenience


Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 1-1/2-in 18-Gauge SX Stapler - SX1838K-R, 1/4-in swivel air fitting, Hex wrench, Carry case, Belt Hook



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

Limited Offer Today!! Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Black Friday and Cyber Monday Deals

Led Projector Lumens

Steel Pipe and Its Many Uses

Look around you. Steel pipe is everywhere! Anywhere you turn or look, you will see some sort of structure or means of conduit, that steel pipe is being used for. And that's not to mention the pipe that is "out of sight, out of mind" that is serving its purpose under the ground.

Reconditioned Tool

Standard or nominal pipe sizes can be found on a pipe chart that is used throughout the industry. The Nominal Pipe Size or N.P.S. chart, gives the actual O.D. or Outside Diameter, the Nominal O.D., Wall Thickness and Weight Per Foot of each steel pipe size. If you don't know anything about N.P.S., its recommended that you take a look at the chart before buying any or doing any projects with pipe.

Reconditioned Tool

There are basically three different types of pipe, and they differ in the way they were manufactured. There is seamless steel pipe that starts out as a solid round and after being heated almost to melting point, a hole is pierced through the center with a tool and creates the pipe. This is know as "Hot Finsh Seamless Pipe". The second and most popular variety known as ERW or "Electric Resistance Welded" Pipe, starts out as a reel or cut-to-width coil of steel, known as "Skelp". The Skelp is maneuvered through a series of rollers that make it round and then as the edges come together, an electric welder makes the longitudinal seam down the length of the pipe. The last and least used manufacturing method is "Buttweld" steel pipe. It is basically the same process as the ERW pipe, except after being rolled up, the edges are heated up and fused together to create the pipe. Larger O.D. steel pipe can be made by rolling and welding pieces of steel plate into cylinders or "Cans" and then welding them together end to end to make the pipe.

Steel pipe is everywhere. Pipe can be fabricated for many purposes. Look at the Large O.D. Pipe being used for billboard structures when traveling down most any highway. It's used in parking lots, for "Bollards" or "Bumper Posts". Just about any restaurant or place of business has an outdoor sign mounted on a pole made of steel. Look at all of galvanized pipe used for highway signs. The list goes on and on, fence posts, culvert pipe at the end of your driveway, pipe piling to stabilize foundation structures of large building and skyscrapers, slurry line pipe used in quarries and sand operations, columns in the basement of your home. That's just to name a few structural applications.

In addition to all of the structural applications, pipe is used by the mile for potable water lines and drainage purposes. Pipe used for "Casing Pipe" that is pulled or jacked into the ground, to encase and protect utility lines under highways, railroads, lakes and rivers. But the main use of a new prime pipe product is "Line Pipe" that is used in the oil and gas industry for conveyance of product from the rig to the refinery.

No matter if its reconditioned used pipe that was taken up from the ground after being decommissioned, new surplus pipe that was leftover from a project or mill rolling, mill reject pipe that has been downgraded due to abnormalities or failed testing or a brand new prime steel pipe product complete with Mill Test Reports to MTR'S, there is a place or use for it in our world.

Steel Pipe and Its Many Uses
Reconditioned Tool

Special Price!!! Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler
Click for larger image and other views

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

>> Click here to update Cheapest prices for Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler <<

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Feature

  • Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
  • Selectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spaces
  • Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
  • Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durability
  • Reversible belt hook: with integrated pencil sharpener for ultimate convenience


Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 1-1/2-in 18-Gauge SX Stapler - SX1838K-R, 1/4-in swivel air fitting, Hex wrench, Carry case, Belt Hook



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler

Limited Offer Today!! Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler Black Friday and Cyber Monday Deals

Speaker Systems

Auto Battery Guide - Discover the Secrets to Reconditioning Batteries

Did you know you could revive a dead battery and save hundreds of dollars per year, replacing seemingly dead batteries? The process is called battery recondition and is provided in a battery guide specifically written by the Battery Geek, aka Kevin Dixon.

Reconditioned Tool

Reconditioning an aged battery is quite easy process, and successes reach to 60% of the time, leaving you with completely dead batteries at 40% which is not bad, if you consider that you can get them for free! Obviously, you need to learn how to recondition and rejuvenate a battery, and with the right instructions it is not a long process. What you are going to love is that you don't have to spend a fortune on equipment; you can start on almost no capital at all.

Reconditioned Tool

1. It is a cheap process:

Apart from money saving on batteries that you use personally, this process can be a good business opportunity, for the open minded person - is that you? Even a part-time occupation can turn a tidy profit for you. Well, the fact is that, dead batteries are thrown away, right? So even if you can only rejuvenate one out of three, this costs you nothing! You are making money for free, and with NO effort!

2. You can do it as a Business:

This is totally depending on you - would like to make some extra money, or just saving from battery reconditioning? You can source seemingly dead batteries from your nearby garage, by placing an ad, or simply spreading out the word. Then you can easily revive them, and sell them for at your neighborhood's garage or repair shop, or on line to eBay.

Here is a nice idea to find customers - agree with your local car repair shop to place a leaflet on their store that advertises your business. Agree to give them a cut of profits for any battery they sell for you or each time they refer someone.

3. Batteries go "dead" all the time:

Just imagine how many devices use batteries. Really, there are no limits to a battery reconditioning expert! Everything relies on portable batteries. Automotive, motorcycle, iPods, mp3s, marine, motorized wheelchair, power tool batteries. Do you know how expensive new batteries can be? Just take a look at your neighborhood store or on the internet. The battery IS the most expensive part of a power tool.

4. What are the costs to consider?

First of all the guide itself - the battery reconditioning guide sells online for about and is immediately downloadable through the internet, no need to wait for the mail. I you go on a professional level, you will need around 0 for a computer controlled battery analyzer. However, you can get that at eBay for less, or you can do without it and use only a voltmeter which does the same job. In addition, I would definitely recommend in considering investing in an analyzer.

Auto Battery Guide - Discover the Secrets to Reconditioning Batteries
Reconditioned Tool

Special Price!!! Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery

Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery
Click for larger image and other views

Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery

>> Click here to update Cheapest prices for Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery <<

Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Feature

  • Application Versatility: Cuts, Grinds, Sands and Scrapes. Compatible: M12 LITHIUM-ION System with over 25 cordless tools. Accessory Adaptor (Included): Compatible with most competitive accessories
  • Run Time: RED LITHIUM Battery offer extended run time. Durability: All Metal gear case. Variable Speed Dial: Match speed to application. On board Fuel Gauge: Displays Remaining Run Time
  • Voltage: 12V; Variable Speed: 12 Settings; OPM: 5,000 - 20,000; Accessory Adapter Included: Yes; On Board Fuel Gauge: Yes; Battery: RED LITHIUM ; No of Battery Included: (2) M12 RED LITHIUM Battery
  • Charge Time: 30 Min; Length: 10-1/4-Inch; Tool Weight: 2.1 lbs; Shipping Weight: 5.61 lbs
  • Includes: 2426 M12 Multi-Tool, Adapter, Wood Cutting Blade, Sanding Pad, (5) Assorted Sanding Sheets, (2) M12 RED LITHIUM Battery, 30-Minute Charger, Contractor Bag


Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Overview

Includes 12V Cordless M12 Multi-Tool Kit - 2426-82, Accessory Adaptor, Wood Cutting Blade, Sanding Pad, (5) Assorted Sanding Sheets, (2) M12 REDLITHIUM Batteries, 30-Minute Charger, Contractor Bag



SAVE NOW on the special offers below!

Available In Stock.

This Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery

Limited Offer Today!! Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Black Friday and Cyber Monday Deals

Bee Pollen Complex

What is a Woodworking Router and What Can it Do For Me

So what does a router do and how to use a router.

Reconditioned Tool

I thought I'd first take a look at the word router and this originates from a verb to rout. Rout is also a noun but this doesn't relate to our woodworking router. The definition of the verb appears to be to rummage or to hollow out or furrow, as with a scoop, gouge, or machine. So perhaps my definition of a woodworking router would be to gouge out or machine out some part of a piece of wood. This could simply be to make a groove or round the edges of a piece of timber.

Reconditioned Tool

The first routers were of course hand operated and were similar in appearance to a flat wood plane but having interchangeable narrow blades rather than the large flat blade. These blades would be shaped to make a grove or round the edge of the timber. The electric router was introduced in the first half of the last century but in fact was a very different product for achieving similar results and relied on a spinning cutter and was known as the spindle router. A company called Elu developed some of the first products and I remember having a quality Elu router myself. I believe Elu is now part of the Makita power tool and Makita router range of products.

The first electric routers had a fixed base and subsequent routers called plunging routers were sprung such that the spinning blade would not protrude beyond the based as the weight or pressure was removed. These types of router were moved over the wood area. The alternative method of use is to mount a router to the underside of a router table and then move the wood over the router and maintaining a fixed position for the table router. This is ideal for a workshop environment and lends itself to additional safety features.

The handheld plunging routers can be used (should be used) with a variety of controls. The base of the router can be fitted with a sidebar device to ensure that the cutting blade remains a constant distance from the edge of the wood you are routing. For example you may wish to cut a groove 4 mm deep and 3 mm from the edge of your piece of wood. The depth can be set to the maximum 4 mm and the sidebar guide will ensure that the groove is not made more than 3mm from the edge of the wood. You could achieve the same results by clamping a straight edge over the surface of the wood to be machined and keep the electric router pressed firmly against the straight edge.

Router cutters or router bits come in many different shapes. The different shapes allow you to use your router to cut square, vee and rounded grooves. There are more router bits to enable round, angular and decorative edge finishing. An edge finishing router bit has a spinning guide at the base of the cutter that prevents the blade cutting deeper into the timber. Generally speaking buying router bits can be a little of a lottery because you want the best bits but don't want to spend a fortune. Unless you need a large selection of router bits for professional work I'd suggest buying a set of router bits with most of the shapes you could ever envisage using. You'll probably also require 1 or 2 straight cutting bits and you may wish to pay a little more money to get the best you can afford if you are to use these bits frequently. For example you may wish to have a 3-4 mm straight cutting blade for groves and rebating edges of your chosen timber. A larger 8-10mm is always useful for taking a little timber off a wider area. Cheaper blades will soon lose their cutting edge and could scorch or burn the timer if you are not careful.

You can choose a router from a variety of manufactures notably Makita, Bosch, Dewalt, Festool, Milwaukee and Porter-Cable. A router is still very much a corded power tool and is often required for long periods of use so there hardly any cordless routers. The Ryobi ZRP600 Trim Router is an 18v cordless device but very much intended for lighter trim work. Many of the manufacturers also supply factory reconditioned routers and router combo kits.

Once you've mastered the use of a router you'll be amazed how many tasks can be improved by using a router.

What is a Woodworking Router and What Can it Do For Me
Reconditioned Tool

Soldering Stand

Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool)

Special Price!!! Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool)

Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool)
Click for larger image and other views

Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool)

>> Click here to update Cheapest prices for Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool) <<

Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool) Feature

  • Powerful motor outputs over 1,200 in/lbs of torque
  • Unique impact mechanism designed to help drive long screws and lag bolts
  • Variable speed trigger with forward/reverse mode
  • 1/4" quick coupler for easy bit changes
  • RPM: 0 - 2,400


Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool) Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes One+ 18V Cordless Impact Driver - ZRP230, (2) Accessory Bits, Plug In Lanyard - P920, Battery And Charger Sold Separately



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool)

Limited Offer Today!! Factory-Reconditioned Ryobi ZRP230 One+ Impact Driver (Bare Tool) Black Friday and Cyber Monday Deals

Lightest Double Stroller Home Theater Wireless Surround Sound Gladiator Wedge Sandals